597933
102
Zoom out
Zoom in
Previous page
1/122
Next page
102
Setup menu list (continued)
RECORD SETUP screen
Item
Display
mode
Q.MENU Description of settings
REC FORMAT CAMERA Selects the recording format.
PH 1080/60i
PH 1080/30P
PH 1080/24P
PH 720/60P
PH 720/30P
PH 720/24P
HA 1080/60i
HG 1080/60i
HE 1080/60i
PH 1080/24P and PH 720/24P represent native recording.
You cannot change the format during interval recording.
PREREC
MODE
CAMERA Sets PRE RECORDING to ON or OFF. (Page 46)
ON
OFF
TCG is set to FREE RUN.
Cannot be set during INTERVAL REC.
TIME STAMP CAMERA Specifies whether date and time information is superimposed over
recorded images.
ON:
Superimposes date and time information on the image.
OFF: Does not superimpose date and time information on the
image.
INTERVAL REC CAMERA Enables frame-by-frame recording at specified intervals to create short
videos of scenes with slow movement over long periods of time. Single
frames are recorded at the specified interval, with 24 frames equaling 1
second of video.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE,
2 MINUTES
When INTERVAL REC is enabled, the following setting items
automatically change as follows.
REC FORMAT: PH 1080/24P, TC MODE: NDF
TC MODE CAMERA Selects the correction mode of the internal time code generator when
the time code of the internal time code generator is recorded.
DF: Uses the drop frame mode.
NDF: Uses the non-drop frame mode.
TC MODE is automatically set to NDF when you set recording frame
rate of recording format to 24P.
TCG CAMERA Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation
mode.
A slight time error may occur when switching to PB mode if the frame
rate is set to 24P.
REC RUN: The time code is advanced only when recording.
TC PRESET CAMERA Sets the initial time code.
YES
NO
Set the frame value to 0 or a multiple of 4 when you set recording
frame rate of recording format to 24P. If any other value is set, the
recorded time code will mis-match.
UB PRESET CAMERA Sets the user information.
YES
NO
indicates the factory setting.
: Can also be configured in Quick Menu. (Page 96)
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HMC 40P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HMC 40P in the language / languages: English as an attachment in your email.

The manual is 19,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info