597933
84
Zoom out
Zoom in
Previous page
1/122
Next page
84
Connecting external units (continued)
TV/Monitor
Only the output signals from the camera are shown.
USB2.0
MIC
COMPONENT
OUT
A/V OUT
HDMI cable
(optional)
AV cable (included)
Component video cable
(included)
Connect these
cables to the
terminals on
the television.
TV/Monitor
Ferrite core
(included)
Ferrite core
(included)
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
When connecting the camera with a TV/monitor using an HDMI cable,
attach the two ferrite cores (included) to the HDMI cable, one at a position
about 5 cm from the TV/monitor terminal and the other at a position about
5 cm from the camera terminal. After attaching the cable as shown in the
diagram on the right, close the terminal so that it clicks and locks into place.
If the ferrite core moves along the cable and cannot be fixed in place,
please attach cable ties to either side of the ferrite core to ensure that it
remains fixed.
Adjust the length of the ties by cutting with scissors, etc.
Always take sufficient care when handling the ferrite core, as it can be easily damaged when dropped or
subjected to other impact.
It is recommended that you use Panasonic’s HDMI cable.
HDMI output will take priority if both HDMI cable and VIDEO OUT cable are connected at the same time.
Simultaneous output is not possible.
This product is not compatible with VIERA Link.
When connecting the camera to another device using the component video cable, if the terminal on the
device to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.
Output by HDMI output, COMPONENT OUT, and A/V OUT
When an HDMI cable is connected simultaneously with a COMPONENT cable or an AV cable, priority for
output is given in the order HDMI > COMPONENT OUT > A/V OUT. (Simultaneous output is not possible.)
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HMC 40P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HMC 40P in the language / languages: English as an attachment in your email.

The manual is 19,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info