597933
27
Zoom out
Zoom in
Previous page
1/122
Next page
27
Preparation
Quick Start mode
This mode allows you to begin recording more quickly.
When using Quick Start mode, you can begin
recording approximately 1.5 seconds after Quick Start
standby mode.
Setting
Hold down the QUICK START button for at least
two seconds while the power is on. The camera
will enter Quick Start standby mode and the
CAMERA and PHOTO lamps will flash.
QUICK START button
ヱャ
ヱヰ
ヲヶリヤレチヵモ
ヱラヰ
ヤモヮユン
To start recording
When the QUICK START button is pressed in
the Quick Start standby mode (lamps flashing),
the lamps light and the camera enters recording
standby mode.
Quick Start mode will be canceled in the
following cases.
The camera remains in Quick Start standby
mode for more than 30 minutes
Battery is low
Battery has been removed
POWER switch is set to OFF
Quick Start standby mode consumes
power, resulting in reduced total recording
time.
Depending on recording settings, Quick Start
may take longer than 1.5 seconds.
Automatic white balance adjustment may take
longer in Quick Start mode.
The zoom ratio will be set to approximately x 1
wide end (Z00) with Quick Start.
Tally lamp
You can set the tally lamp to light in the following
situations by setting the REC LAMP item (Page
109) in the OTHER FUNCTIONS screen to ON.
Battery is low (flashes 4 times per second)
Available SD Memory Card capacity is low
(flashes 4 times per second)
Remaining battery capacity is low
(flashes once per second)
Remaining memory of the SD Memory Card is
low (flashes once per second)
In addition, the tally lamp will flash regardless of
the REC LAMP setting when receiving commands
from the remote control.
Tally lamp
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HMC 40P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HMC 40P in the language / languages: English as an attachment in your email.

The manual is 19,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info