291907
23
Zoom out
Zoom in
Previous page
1/113
Next page
Preparation
23
Standby mode
This mode allows the time required between switching
on the power and beginning recording to be reduced.
Setting
Hold down the STAND BY button for at least two
seconds while the power is on to activate the
standby mode setting. STD BY will be displayed on
the LCD monitor and the viewfinder.
When this setting is activated, moving the
POWER switch to OFF will set the camera to
standby mode, and the mode lamp (CAM) will
flash once every two seconds.
The camera will be set to standby mode only
when the POWER switch is set to OFF during
CAM mode.
Standby mode cannot be activated if the POWER
switch is set to OFF during PB mode or PC mode.
STAND BY button
Canceling setting
Hold down the STAND BY button for at least
two seconds while the power is on to cancel the
standby mode setting. STD BY will be cease to be
displayed on the LCD monitor or the viewfinder.
Standby mode will be canceled in the following
circumstances.
If more than 30 minutes have elapsed since the
power was switched off.
Battery is low.
Battery has been removed.
When the STAND BY button is pressed in the
standby mode, the mode lamp (CAM) will flash
more quickly and the standby mode will be
extended by 30 minutes. It also flashes more
quickly five minutes before the standby mode
is canceled.
During standby mode, the camera will still
consume approximately 60% of the power it
would during paused recording, meaning that
available recording time will continue to be
reduced even through the POWER switch is
set to OFF.
·
·
·
Tally lamp
The tally lamp can be illuminated during recording by
setting the REC LAMP item of the OTHER FUNCTIONS
screen (Page 98) to any setting other than OFF.
The tally lamp will flash in any of the following
circumstances.
Receiving remote control operation
(flashes 8 times per second)
Recording error has occurred
(flashes 4 times per second)
Battery is low (flashes 4 times per second)
Available SD Memory Card capacity is low
(flashes 4 times per second)
Optical Image Stabilizer function is not operating
correctly (flashes 4 times per second)
Problem with focus function
(flashes 4 times per second)
Remaining battery capacity is low
(flashes once per second)
Remaining memory of the SD Memory Card is
low (flashes once per second)
Tally lamp
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ag hmc 151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ag hmc 151 in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic ag hmc 151

Panasonic ag hmc 151 Specifications - English - 12 pages

Panasonic ag hmc 151 User Manual - French - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info