Manual Panasonic AG-DVX100A (page 11 of 72) (English)

574347

Zoom out

Zoom in

1/72

OThis function may not operate properly if

there is an unrecorded blank near the tape

start or at a point along the tape.

OBefore proceeding with recording, check

the picture which has been searched.

AGAIN switch

When the camera screen is too dark, change

the setting of this switch to boost the gain and

make the screen brighter. The M and H gain

values are set using the MID GAIN item and

HIGH GAIN item on the setting menu SW

MODE screen. (See page 43)

L:The switch is normally kept at this

position. (0 dB)

M:The gain of the camera video amplifier is

boosted. (Factory setting: 6 dB)

H:The gain of the camera video amplifier is

further boosted. (Factory setting: 12 dB)

BWHITE BAL switch

This is used to set the white balance.

A or B:

The white balance value adjusted by the

AWB button C is stored in the memory.

PRST (preset):

Set the switch to this position in cases

where, for instance, there is no time to

adjust the white balance.

The 3200K and 5600K white balance

values are stored in the memory.

Press the AWB button to switch between

the two values.

OThe ATW (Auto Tracking White) function

can be allocated to the A, B or PRST

position using the ATW item on the setting

menu SW MODE screen. (See page 43)

OWhat kind of light source is being used

during shooting is determined by the white

balance sensor.

Do not block the front of the white balance

sensor with your hand or any other object

during shooting or the ATW function will

not operate properly.

Parts and their functions

>CAMERA/VCR button and lamp

Each time this button is pressed, the

operation mode is switched between the

camera mode and VCR mode, and the lamp

of the selected mode lights.

Select the camera mode for shooting.

Select the VCR mode to check the tape

contents or input and record video signals

from an external source.

?Scene file dial

This is used to select the scene files. (See

page 36)

Settings tailored to various shooting

conditions are stored in the positions of this

dial.

During shooting, the necessary file can

be instantly loaded using the dial.

@EVF DTL/END SEARCH button

When this button is pressed inthe camera

mode, the outlines of the images in the

viewfinder and on the LCD monitor are

accentuated, and focusing is thereby facilitated.

“EVF DTL ON” will also be displayed on the

center of the screen for approximately 2

seconds. However, the images which are

recorded at this time will be the regular images

whose outlines are not accentuated.

Pressing the button once again will return the

unit to its original status. “EVF DTL OFF” will

also be displayed on the center of the screen

for approximately 2 seconds.

When this button is pressed in the VCR

mode, the unrecorded blanks on the video

tape are searched, and the still picture mode

is established about one second before an

unrecorded blank.

The part which was shot last can also be

searched using the END SEARCH item

setting on the setting menu PLAYBACK

FUNCTIONS screen. (See page 44)

OWhen one tape is replaced with another,

the part which was shot last cannot be

searched using this button.

OIf no signals have been recorded on the

tape, the tape stops at the tape end.

>?@

White balance sensor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVX100A in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic AG-DVX100A Manual

Product: