597931
72
Zoom out
Zoom in
Previous page
1/82
Next page
72
Menu configuration (cont.)
The underlining indicates the factory setting.
DISPLAY SETUP screen
Item/
(Display
mode)
Description of settings
LCD/EVF
SET
(CAM) (VCR)
Use this to adjust the display level of the
images appearing in the viewfinder or on the
LCD monitor.
LCD BRIGHTNESS:
Select this to adjust the brightness of the
images on the LCD monitor.
LCD COLOR LEVEL:
Select this to adjust the color level of the
images on the LCD monitor.
EVF BRIGHTNESS:
Select this to adjust the brightness of the
images in the viewfinder.
SELF SHOOT
(CAM)
When MIRROR is selected, an image with
the left and right sides reversed will appear
on the LCD monitor when shooting a selfpor-
trait.
NORMAL, MIRROR
EVF MODE
(CAM) (VCR)
Use this to select to switch the screen
images.
ON:
The images are always displayed in the
viewfinder.
AUTO:
The images in the viewfinder are cleared
when the LCD monitor is opened.
EVF COLOR
(CAM) (VCR)
Select ON to display the images on the view-
finder screen in color.
OFF:
The images are displayed in black and
white.
ON:
The images are displayed in color.
EVF DETAIL
(CAM) (VCR)
When ON is selected, the contours of the
images in the viewfinder and on the LCD
monitor are emphasized to make focusing
easier.
However, the images recorded will be normal
images without emphasized contours.
OFF, ON
OTHER FUNCTIONS screen
Item/
(Display
mode)
Description of settings
REMOTE
(CAM) (VCR)
Use this to set the operations to be performed
using the accessory remote control unit.
(P19)
VCR1:
Operations performed using the remote
control unit which has been set up for use
with VCR1 are accepted.
VCR2:
Operations performed using the remote
control unit which has been set up for use
with VCR2 are accepted.
OFF:
No operations performed using a remote
control unit are accepted.
DV
CONTROL
(CAM)
Use this to set the control method to be used
when a backup unit is connected to the DV
connector and backup recording is to be per-
formed.
OFF:
The backup unit is not controlled.
EXT:
The backup unit is controlled using the
camera-recorder’s START/STOP button.
The images shot using the camera-
recorder are recorded using the backup
unit. (The camera-recorder does not per-
form the recording operation.)
BOTH:
The images shot using the camera-
recorder are recorded by both the camera-
recorder and the backup unit.
CHAIN:
When the camera-recorder’s tape
approaches its end during shooting,
recording is automatically started by the
backup unit that has been waiting in the
recording standby mode.
DV
CMD SEL
(CAM)
Use this to set the recording operation to be
performed by the backup unit when the cam-
era-recorder’s START/STOP button is
pressed.
REC_P:
The START/STOP button switches
between recording and rec pause.
STOP:
The START/STOP button switches
between recording and stop.
<Note>
If the backup unit does not have a rec pause
function, select STOP.
REC LAMP
(CAM)
Select ON to light the tally lamp during shoot-
ing. (P77)
OFF
, ON
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVC 60p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVC 60p in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info