597930
59
Zoom out
Zoom in
Previous page
1/88
Next page
59
EDITING
Audio dubbing (cont.)
$ Listening to sound that has
been dubbed
You can switch between the sound that has
been dubbed and the sound heard during
shooting using the 32K (12bit) AUDIO item
setting on the PLAYBACK FUNCTION
screen. (P74)
ST1:
The sound heard during shooting is played
back.
ST2:
The sound that has been dubbed on a
recording is played back.
MIX:
Both the sound heard during shooting and
that you have dubbed on a recording are
played back at the same time.
$ Performing audio dubbing as
you listen to it
You can monitor the sound by setting ST2
while audio dubbing is temporarily
suspended.
If you use headphones when performing
audio dubbing on a recording using mic
input, you can listen to the sound being
dubbed.
When you perform audio dubbing using line
input (from the audio component connected
to the AV IN/OUT jack), you can listen to the
sound being dubbed through the speakers.
$ Using the counter memory
function to edit dubbed sound
1 First reset the counter memory display at
the position where the audio dubbing is to
end. (P54)
2 Rewind the tape to the position where the
audio dubbing is to start, and start the
dubbing.
3 The tape then stops automatically at the
position on the tape where the counter
memory display was reset.
$ Adjusting the audio input level
Use the procedure described for Adjusting
the mic input audio level (P47) to adjust the
audio level of mic input and line input (from
the audio component connected to the AV
IN/OUT jack).
$ Adjusting the audio output
level
Use the procedure described for Adjusting
the headphone volume (P48) to adjust the
audio level output from the headphones and
speakers.
Inputs and audio tracks for recordings
2 You will need the XLR microphone adapter (AG-
MYA30G, option) if you intend to use the XLR
microphone. (P57)
O Which sound is to be recorded during shooting is
automatically determined by the order of priority for the
mic inputs.
O The audio tracks on which dubbed sound is to be
recorded can be changed using the A.DUB INPUT item
on the AV IN/OUT SETUP screen. (P78)
Input
When performing audio dubbing
in the 32K (12bit) mode
A. DUB INPUT:
MIC
A. DUB INPUT:
A_IN
Order of priority
for mic inputs
High
Low
When shooting
External mic L channel CH1 CH3
__
External mic R channel CH2 CH4
__
INPUT 1 (XLR mic) 2
CH1 CH3
__
INPUT 2 (XLR mic) 2
CH2 (CH1) CH4 (CH3)
__
Internal mic L channel CH1 CH3
__
Internal mic R channel CH2 CH4
__
Audio IN/OUT CH1 (L channel)
(white phono jack)
__ __
CH3
Audio IN/OUT CH2 (R channel)
(red phono jack)
__ __
CH4
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVC 30p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVC 30p in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info