597929
15
Zoom out
Zoom in
Previous page
1/42
Next page
Before using
15
Setting date and time
If the screen shows the incorrect date/time, then adjust it.
Set to Tape Recording Mode.
1 Set [BASIC] >> [CLOCK SET] >> [YES].
2 Press the [2] or [1] button in order to select the item to
be set. Then press the [3] or [4] button to set the
desired value.
The year will change as follows:
2000, 2001, ..., 2089, 2000, ...
The 24-hour clock is used.
3 Press the [ENTER] button to determine the setting.
The clock function starts at [00] seconds.
ª
About date/time
The date and time function are driven by a built-in lithium
battery.
Make sure to check the time before recording because the
built-in clock is not very accurate.
ª
Recharging the built-in lithium battery
If [0] or [--] is indicated when the camera is turned on, then
the built-in lithium battery runs down. Connect the AC adapter
to the camera or place the battery on the camera, and the
built-in lithium battery will be recharged. Leave the camera as
is for approx. 24 hours, and the battery will drive the date and
time for approx. 6 months. (Even if the [OFF/ON] switch is set
to [OFF], the battery is still being recharged.)
Adjusting LCD monitor/viewfinder
ª Adjusting the brightness and color level
1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].
2 Press the [3] or [4] button in order to select the item to
be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
: Brightness of the viewfinder
3 Press the [2] or [1] button to move the bar indication
representing the brightness.
4 Press the [MENU] or [ENTER] button to complete the
settings.
In order to adjust the brightness of the viewfinder, close the
LCD monitor, and the viewfinder will be activated.
When the LCD monitor is rotated by 180° towards the lens,
the brightness of the LCD monitor cannot be adjusted.
These settings will not affect the images actually recorded.
ª
In order to increase the brightness of the entire
LCD monitor
1
Press the [POWER LCD] button.
The [POWER LCD] lamp lights up.
If the [POWER LCD] button is pressed, the entire LCD
monitor will become approx. twice as bright as the normal.
Press this button again, and the lamp will go off and the
brightness will revert back to the original brightness.
This will not affect the images to be recorded.
If you turn on the camera when the AC adapter is used, the
[POWER LCD] function will not be activated.
EVF
POWER
LCD
DVC20_Eng.book 15 ページ 2006年4月6日 木曜日 午前10時10分
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVC 20p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVC 20p in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info