597929
12
Zoom out
Zoom in
Previous page
1/42
Next page
Before using
12
Inserting/removing a cassette
1 Slide the [OPEN/EJECT] lever and open the cassette
cover.
When the cover is fully opened, the cassette holder will come
out.
2 After the cassette holder is opened, insert/remove the
cassette.
When inserting a cassette, orient it as shown in the figure,
and then securely insert it as far as it goes.
When removing, pull it straight out.
3 Push the [PUSH] mark 1 in order to close the cassette
holder.
4 Only after the cassette holder is completely housed,
close the cassette cover.
After using, make sure to rewind the cassette completely,
remove it, and put it in a case. Store the case in an upright
position. (
-38-)
When condensation is formed on the lens or the main unit of
the camera-recorder, even if no condensation alarm is
indicated, condensation may have formed on the heads or the
cassette tape. Do not open the cassette cover. (
-36-)
ª
When the cassette holder does not come out
Close the cassette cover completely, and then open it again
completely.
Check if the battery has run down.
ª
When the cassette holder cannot be housed
Set the [OFF/ON] switch to [OFF], then to [ON] again.
Check if the battery has run down.
ª
Inserting/removing the cassette
When the cassette holder is in action, do not touch anything
except the [PUSH] mark.
When inserting a previously recorded cassette, use the blank
search function to find the position where you want to
continue recording. If you overwrite-record on a previously
recorded cassette, be sure to find the position where you
continue recording.
Close the cassette cover tightly.
When closing the cassette cover, do not get anything, such as
a cable, caught in the cover.
ª
Accidental erasure prevention
If the accidental erasure prevention slider 1 of a cassette is
opened (slide in the direction of the [SAVE] arrow), the cassette
cannot be recorded. When recording, close the accidental
erasure prevention slider of the cassette (slide in the direction
of the [REC] arrow).
OPEN/
EJECT
PUSH
1
1
R E C
SAVE
DVC20_Eng.book 12 ページ 2006年4月6日 木曜日 午前10時10分
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVC 20p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVC 20p in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info