597927
114
Zoom out
Zoom in
Previous page
1/126
Next page
62
Setup menu list (continued)
Item
Display
mode
Description of settings
CARD READ
(Camera)
Loads the metadata recorded on the SD Memory Card on to the unit.
SLOT1, SLOT2, NO
“NO FILE’ is displayed when no metadata is recorded on the SD Memory Card.•
RECORD
(Camera)
Sets whether to record the metadata to be loaded on the unit simultaneously on
a SD Memory Card.
ON: Records simultaneously
OFF: Does not record simultaneously
USER CLIP
NAME
(Camera)
Selects the method of recording the USER CLIP NAME.
TYPE1: The user clip name is the same as the CLIP NAME if no uploaded
metadata or data exists.
TYPE2: The user clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if no uploaded data exists.
META DATA
PROP
(Camera)
Displays the metadata recorded in the unit.
YES, NO
CLIP
COUNTER RST
(Camera)
Resets the COUNT value to 1.
YES, NO
META INT SET
(Camera)
Initializes the metadata recorded in the unit.
All settings, including the ON or OFF setting for RECORD are now cleared.
YES, NO
OTHER FUNCTIONS screen
Item
Display
mode
Description of settings
LENS CHECK
(Camera)
ON: Checks the communication status with the lens. Video shooting is not
performed if checking is not proper.
OFF: Does not check the communication status with the lens.
It is recommended to set LENS CHECK to ON when you are using lenses •
conforming to the Micro Four Thirds and Four Thirds standard.
When you are using a lens that has no communication connection between the •
camera and lens through the use of a mount adaptor, video shooting is enabled
when you set this item to OFF.
IR REMOTE
(Camera)
(PB)
Sets the operations of the supplied remote control unit.
ON: Accepts commands from the remote control.
•Notethatifthesametypeofremotecontrolisusednearthe
unit, the unit may receive commands from the other remote
control, during shooting for example, and suddenly operate in an
unexpected manner.
OFF: Does not accept commands from the remote control.
TALLY LAMP
(Camera)
Sets lighting of the tally lamp.
FRONT: The front tally lamp (microphone side) lights.
REAR: The rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF: No tally lamp lights.
CLOCK SET
(Camera)
(PB)
Sets the built-in calendar of the camera.
indicates the factory setting.
META DATA screen
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AF100P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AF100P in the language / languages: English as an attachment in your email.

The manual is 12,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info