597924
11
Zoom out
Zoom in
Previous page
1/110
Next page
11
Shooting
Switching AVCHD mode/DV mode
1
Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
2
Press the <MENU> button.
3
Select [AVCHD] or [DV] in the [HD/SD
MODE] item on the setup menu [RECORDING
SETUP] screen.
4
If the message [TURN POWER OFF] is
displayed, switch off the power and switch it
on again.
The mode is switched by turning the power on
again.
For how to turn the power on and off, see
page 30 of vol.1.
When you switch to AVCHD mode, <HD>
indicator lights in blue.
When you switch to DV mode, <HD>
indicator is turned off.
Shooting in Auto mode
1
Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
Make sure the mode lamp <CAMERA> is lit
in red.
2
Set the <AUTO/MANU> switch to <AUTO>.
[
] is displayed at the top of the LCD monitor
and in the viewnder.
In accordance with setting of items on the
setup menu [AUTO SW] screen, focus,
gain, iris, and white balance are adjusted
automatically.
In Auto mode, the face detection function can
be used by assigning [FACE DETECT] to
a USER button. This function automatically
detects faces, focuses on them, and adjusts
the brightness to an appropriate level. When
[FACE DETECT] is set, [
] appears on the
screen.
High-priority frames with orange borders
appear on the faces that are large or near
the center, and gray frames appear on
the others. Up to 15 detected frames are
displayed on the screen.
If [PRIMARY] is set in the [FACE FRAMING]
item of the setting menu [SW MODE] screen,
only the high-priority orange frames are
displayed.
While the focus assist function (enlarged
view) is operating, the detected frame cannot
display.
The [FACE DETECT] function is released in
the following cases.
- When setting the <AUTO/MANU> switch to
<MANU> position
- When switched to <PB> mode
- When turning off the power of the camera
The [FACE DETECT] function can be set
even when setting the <AUTO/MANU>
switch to <MANU> position. [
] will be
displayed on the screen.
3
Press the <START/STOP> button to start
shooting.
Press the <START/STOP> button again to
pause shooting.
When shooting at a low angle, it is
convenient to use the <START/STOP>
button on the side of the handle. Locking with
the <HOLD> switch prevents unintentional
operation. (Page 24)
When the menu screen is displayed, shooting
is not possible. After closing the menu
screen, press the <START/STOP> button.
When the memory card slot cover is opened
during shooting, shooting stops.
AUTO
MANU
2
1 3
<REC CHECK> button
<START/STOP>
button on the handle
Lock release button <START/STOP> button
POWER/MODE switch
PB
O
F
F
O
N
M
O
D
E
POWER
QUICK START
PHOTO
CAMERA
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AC160AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AC160AP in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info