597925
42
Zoom out
Zoom in
Previous page
1/110
Next page
42
Using an external microphone and
audio devices
INPUT1 switch
(MIC POWER +48V)
INPUT2 switch
(MIC POWER +48V)
INPUT1 LINE/MIC switch
INPUT2 LINE/MIC switch
AUDIO INPUT1 terminal
(XLR 3-pin)
AUDIO INPUT2 terminal
(XLR 3-pin)
1
Connect an external microphone or audio
device to the AUDIO INPUT1/2 terminals (XLR
3-pin). (Page 67)
2
Switch the connected audio input signal
with the INPUT1 LINE/MIC switch or INPUT2
LINE/MIC switch.
<LINE>: (When connecting audio device)
The input level is 0 dBu.
<MIC>: (When connecting an external
microphone)
The factory setting for input level is -50 dBu.
The input level can be changed to [-40dB] or
[-60dB] with the [MIC GAIN1] item and [MIC
GAIN2] item on the setup menu [RECORDING
SETUP] screen. (Page 90) However, sensitivity
will be higher when set to [-60dB], and more
noise may be recorded.
3
When using the phantom microphone (which
requires +48V power supply)
Set the INPUT1 switch (MIC POWER+48V) and
INPUT2 switch (MIC POWER+48V) to <ON>.
<ON>: (When connecting the phantom
microphone)
+48V power is supplied to AUDIO INPUT1/2
terminals.
<OFF>: (When not connecting the phantom
microphone)
+48V power is not supplied to AUDIO
INPUT1/2 terminals.
When you use a phantom microphone, the
battery duration will become shorter.
When devices that do not support +48V
power supply are connected, set the phantom
microphone to <OFF>. If set to <ON>, the
connected devices might be damaged.
When using the AG-MC200G (optional), set
the [MIC GAIN1] or [MIC GAIN2] item of the
[RECORDING SETUP] screen to [-50dB].
4
Use the AUDIO CH1 SELECT switch to select
the input signal to be recorded to audio
channel 1.
<INT (L)>:
Audio from the built-in microphone Lch is
recorded.
<INPUT1>:
Audio from the device connected to AUDIO
INPUT1 terminal is recorded.
<INPUT2>:
Audio from the device connected to AUDIO
INPUT2 terminal is recorded.
5
Use the AUDIO CH2 SELECT switch to select
the input signal to be recorded to audio
channel 2.
<INT (R)>:
Audio from the built-in microphone Rch is
recorded.
<INPUT2>:
Audio from the device connected to AUDIO
INPUT2 terminal is recorded.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AC160AEJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AC160AEJ in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info