27710
409
Zoom out
Zoom in
Previous page
1/444
Next page
HotSync problems
397
HotSync problems
Problem Solution
I cannot perform a HotSync
operation. What should I check
to make sure I am doing it
correctly?
Make sure the HotSync cradle is connected securely.
On a Windows computer try these steps:
1. Check the Windows system tray to make sure the
HotSync Manager is running. If it is not, open Palm
Desktop software.
2. Make sure you selected Local USB or Local Serial, as
appropriate, from the HotSync Manager menu.
3. If you are using the serial cradle, make sure you selected the
correct serial port on the Local tab in the Setup dialog box.
It should be set to the port where you connected the
HotSync cradle.
On a Mac computer, try the following:
Make sure HotSync Manager is enabled. If it is not, double-
click the HotSync Manager icon in the Palm folder and
enable HotSync Manager on the HotSync Controls tab.
I can't perform a network
HotSync operation using my
wireless LAN.
Make sure you are connected to your wireless LAN by
checking your Signal Status. This can be found within the
Wi-Fi Preferences or from the command bar. See “Turning
the 802.11b radio on and off” in Chapter 18.
Make sure the PC selected for Network HotSync is your PC.
See “Performing a wireless network HotSync operation” in
Chapter 17.
I can't find my PC while
attempting a network HotSync
operation.
You can enter your computer name manually by tapping
Other within Network HotSync setup and enter your PC's
name or IP address. To find the name or IP address of your PC,
consult with your network administrator or your computer
documentation for instructions. For more information about
manually adding a PC, see “Performing a wireless network
HotSync operation” in Chapter 17.
I performed a HotSync
operation, but one of my
applications did not
synchronize.
On a Windows computer, click the HotSync Manager and
choose Custom. Check that the correct conduit is active.
On a Mac computer, double-click the HotSync Manager
icon . From the HotSync menu, choose Conduit Settings.
Select your username from the User pop-up menu, and
check that the correct conduit is active.
409


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Palm TUNGSTEN_C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Palm TUNGSTEN_C in the language / languages: English as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info