735932
13
Zoom out
Zoom in
Previous page
1/22
Next page
--Taking Temperature in Surface Temperature Mode (Direct Mode)
1. Setup the measurement mode to “Surface mode” (the setup
step see the above “2) Function Setup mode”;
2. Aim the probe tip at the object which will be measured.
3. Press [Power/Scan] button, then the measurement completed.
It will show the measurement data after a “bi” sound.
4. If the measured temperature is higher than 100℃ , display “Hi”.
If the measured temperature is below 0℃,display “Lo”.
5Automatic shutdown
If you do nothing after the temperature measurement completed
and 15 seconds later, the thermometer will automatically
shutdown.
6) Memory function
In the power-on state, press the Up/Down button into memory
query mode, the LCD will be showing the recorded values or ----
symbol if not record accompanied with memory M symbol. The
PC868 can restore up to 99 sets data. the query interface can
display memory serial number, body mode and recorded tempera-
ture values.
Remark: The temperature result of surface mode can not be saved.
And the abnormal body temperature result can not be saved too
(such as Lo, Err or Hi).
7) Backlight function
The backlight will be according to the different measuring
temperature to lighting different color. The detailed as below table:
TEMPERATURE TAKING HINTS
- For heat-insulated object, please don’t measure the
surface.
- For the hot liquid, please do not directly measure the
surface, because the hot steam fog can condense in the
sensor lens and cause the measurement deviation.
Measuring temperature
Backlight
Lighting time
< 37.5
Green backlight
7s
37.5 to 37.9
Orange backlight
7s
38.0
Red backlight
7s
Remarks: This specification of this table only for the factory default state. If the user into the setup
mode to setting the orange or red backing temperature, then will compliance with the setting result.
- 12 -
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pacom PC868 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pacom PC868 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info