735930
23
Zoom out
Zoom in
Previous page
1/28
Next page
Guidance and manufacturer’s declaration - electromagnetic
immunity - for EQUIPMENT and SYSTEMS that are not LIFE-SUP-
PORTING
Guidance and manufacturer’s declaration - electromagnetic immunity
The Medical Infrared Thermometer is intended for use in the
electromagnetic environment specified below. The customer or user of
the device should ensure that it is only used in such an environment.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetism is
affected by absorption and reflection from structures, objects and people.
Theoretically, the field strengths of such fixed transmitters as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radios, AM and FM
radio signals and TV signals cannot be predicted with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site
survey should be considered. The field strength in the location in which the
thermometer is to be used should be measured to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such as
re-orienting or relocating the thermometer. Over the frequency range of 150 kHz to 80
MHz, the field strength should be less than 3 V/m.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic environment -
guidance
80 MHz to 800 MHz
800 MHz to 2.5 GHz
Portable and mobile RF
communications equipment
should not be used closer to any
part of the device.
Infrared Thermometer, including cables,
than the recommended separation
distance calculated by the equation
applicable to the frequency of the
transmitter. Recommended separation
distance:
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer,
and d is the recommended separation
distance in metres (m). b Field strengths
from mixed RF transmitters, as determined
by an electromagnetic site survey, a
should be less than the compliance level
in each frequency range. b interference
may occur in the vicinity of equipment
marked with the following symbol:
3 V/m
Radiated
RF
IEC
61000-4-3
3 V/m
80 MHz
To 2.5
GHz
- 20 -
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pacom PC828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pacom PC828 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info