Manual Pacojet 2 (page 18 of 29) (English)

660371

Zoom out

Zoom in

1/29

Programming pacotizing tasksc)

Select the pacotizing mode on the control panel if this has not yet been

selected.

When the protective beaker is mounted correctly,

the pacotizing settings are displayed immediately.

The overpressure function is set by default for pa-

cotizing prior to start and can be deactivated as

requiredbyusingtheselectororarrowbuttonsfor

“normal pressure” before start.

As a further processing option, one may now continue with the default preset-

ting “pacotize the entire beaker” or one can select the amount of total and

decimal portions.

Pacotizingd)

When the START button has been pressed, the

PACOJET 2 will proceed through the chosen

processing cycle fully automatically. Upon comple-

tion of the processing cycle, the shaft and pacotiz-

ing blade return to the start position, the beaker

is depressurized automatically and the pacotizing

cycle ends.

IMPORTANT! Î

Never start the machine without having inserted a pacotizing beaker into the

protective outer beaker!

2.2

4.5

IMPORTANT! Î

Thefrozenfoodproductmustadherermlytothepacotizingbeakerduring

the pacotizing process. Furthermore, the beaker contents may not thaw prior

to pacotizing. In either case, the frozen product may dislodge itself from the

beaker inner surface during pacotizing and result in machine overload.

Take the protective outer beaker with an inserted

pacotizing beaker by its handle and place it on the

base plate of the machine. Push the protective

outer beaker back against the rounded back wall

of the base to centre it. The beaker handle should

be facing toward the right side of the machine and

perpendicular to it. Now raise the protective outer

beaker upward into position.

The top of the protective beaker must have ush

contact with the machine, so that the tabs of the

protectiveouterbeaker t snuglyintothe twist-t-

ting of the PACOJET 2. Now turn the beaker handle

clockwise, i.e.fromright to left-front, 90° until the

handle is perpendicular to the front. Done correctly,

the protective outer beaker will now be tightly and

evenly mounted in the PACOJET 2.

To avoid damage to the PACOJET 2 or injury to operators, the machine will

only function when the protective outer beaker is properly mounted in the

machine.

IMPORTANT! Î

Never mount the protective outer beaker into the PACOJET 2 with a paco-

tizingblade andsprayguardsimplyrestingonit,asin thiscase, sufcient

contact of the pacotizing blade to the magnetic end of the shaft cannot be se-

cured and the pacotizing blade may fall into the beaker. Starting the machine

under this condition can damage the pacotizing blade and the shaft.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pacojet 2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pacojet 2

Pacojet 2 Additional guide - German - 4 pages

Pacojet 2 User Manual - German - 29 pages

Pacojet 2 Quick start guide - All languages - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pacojet 2 Manual

Product: