469056
10
Zoom out
Zoom in
Previous page
1/54
Next page
10 - Quick Start & Troubleshooting Guide
Disc Compatibility for Recordable Drives
•DVD±RW Writer
: DVRW drives (or DVD Dual drives) can write to recordable CDs, recordable DVDs ('-
' or '+').
Double-Layer DVD-RW Writer:
Double-Layer DVD-RW drives (or DVD+R9 DL drives) can write to
recordable CDs and single- or double-layer recordable DVDs.
Blu-ray Combo Drive
: Blu-ray Combo drives can write to recordable CDs, all 'standard' recordable DVDs
(but not 'HD' DVDs) and may read from (but not write to) Blu-ray discs.
Blu-ray Writer
: Blu-ray drives can write to recordable CDs, all 'standard' recordable DVDs and recordable Blu-ray discs.
Precautions
If a program needs a disc, insert the disc into the drive before you start the program.
Do not force a disc into the drive; make sure the disc is correctly inserted, then close the disc tray.
Do not eject the disc without first closing the program that is using the disc. This could potentially cause your computer to
stop responding. Should this happen, restart your computer by using the Windows Task Manager.
If the tray does not eject, you may try to open it manually:
1. Switch your computer off.
2. Carefully insert a straightened paper clip into the emergency eject port (if
available). Do not use a pencil as the lead may break inside the eject port
and damage the drive.
Keep the disc tray closed whenever you are not using the drive. Do not touch the optical lens in the drive, if the lens is
dirty, the optical drive may not function correctly.
Do not wipe the lens with a normal cloth. Use a cotton swab to gently clean the lens.
The optical drive is classified as a Class 1 laser product.
Note: This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
Ports and Connectors
The ports and connector types described below are commonly used on Packard Bell computers. However, this does not mean
that they are present on the computer you have purchased, nor that it is limited to these ports. To view documentation
specific to the model you have purchased, please check InfoCentre.
Precautions
Before you attach any device, check the installation instructions that were supplied with it.
Do not remove a device if the computer is using it.
Most devices may be added or removed while the computer is on. They will be detected and installed automatically.
However, certain devices must be deactivated before they can be removed from the computer (for example, see Removing
a card from an External Card Reader on page 9).
Legacy Ports
PS/2 - Connect a mouse and keyboard to these connectors.
Caution: Unlike most connectors, you must turn off your computer before adding or removing a legacy-
device.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Packard Bell iPower at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Packard Bell iPower in the language / languages: English as an attachment in your email.

The manual is 6,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Packard Bell iPower

Packard Bell iPower Quick start guide - German - 62 pages

Packard Bell iPower Quick start guide - Dutch - 60 pages

Packard Bell iPower Quick start guide - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info