469055

Packard Bell iMax Manual

43
Zoom out
Zoom in
Previous page
1/54
Next page
Helpdesk - 43
b. Check that the dialling type is correctly set-up for your country. Click on Start > Control Panel. Change the
View by: option to Large icons, then select Phone and Modem. Make any changes to match your phone
configuration and click on OK to finish.
4. The modem is used by another program ("COM port in use" error message).
You may have a telephone or fax program running; These use the modem and make it unavailable for other applications:
a. Close all programs that might use the modem (e.g. telephone or fax software).
b. Restart the computer. This will reset all connections.
You are using DSL or cable connection
1. Your DSL connection has not been activated.
Your ISP may need to contact your local telephone operator to activate DSL access on your line. Depending on the chosen
provider, this may take several weeks. To enquire about your connection, please contact your ISP.
2. Your DSL modem is not picking up the line.
a. Check all cable connections (e.g., plugs, sockets, filters).
b. Disconnect your modem and plug in a telephone to check the integrity of your telephone line. If you can hear a
normal dialling tone on the phone, then your modem or cable may be defective.
3. Your modem is defective.
Check the status lights on your modem and refer to manufacturer's documentation. If the problem persists and the
connection has been previously working, then contact your ISP.
When Surfing the Internet, You Get an Error Message
1. You are not connected.
a. Look at the lower right part of the Notification Area.
b. If you cannot see the connection bars , right click on the Task Bar at the bottom of your screen and
choose Properties.
Click on the Customize button in the Notification area section.
Place a tick in the box in front of Always show all icons and notifications on the taskbar and then OK.
c. The Networks connection icon indicates if you have a reliable network connection (either wireless or over a cable).
d. Click on the icon, then select Open Network and Sharing Center to see more information.
2. A connection to the remote site cannot be established.
Try again later or check with your ISP whether the service is available.
3. A pop up message warns you that the page contains errors (e.g. ‘the page contains javascript errors’).
Simply click on OK to close the message window.
You Cannot Send or Receive Emails
1. You are not connected.
To send and receive emails, you need to be connected to the Internet. Look for the network connection icon at the lower
right part of the Notification Area. Please see "When Surfing the Internet, You Get an Error Message" on page 43.
2. Your ISP or that of your recipient is having technical difficulties.
Try again later or check with your ISP whether the service is available.
3. Using several ISPs or email accounts can cause problems.
Check that you have selected the correct ISP for the account you are attempting to use.
4. Your Internet account settings may have been changed.
a. Disconnect from the Internet: Close Windows Mail and any other applications.
b. Check your connection details (username, password, server phone number, email address, etc.) and restore your
Internet settings, following the procedure given by your ISP.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Packard Bell iMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Packard Bell iMax in the language / languages: English as an attachment in your email.

The manual is 6,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Packard Bell iMax

Packard Bell iMax Quick start guide - German - 62 pages

Packard Bell iMax Quick start guide - Dutch - 60 pages

Packard Bell iMax Quick start guide - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info