469055
36
Zoom out
Zoom in
Previous page
1/54
Next page
36 - Quick Start & Troubleshooting Guide
Removing additional external devices
These devices may include a printer, a scanner, a modem, etc.
1. Disconnect all external devices from your computer, except the monitor cable and the keyboard.
2. Try to restart your computer and check if it works correctly.
3. If it does not, restart your computer without the keyboard and mouse. If it solves your problem, please contact the
Customer Contact Center.
Removing additional internal hardware
Internal hardware could be items such as additional memory, a network card, etc.
1. Remove any additional internal device you have installed. Note that if a third party installed a device, we advise you to
refer to them to remove the device.
2. Try to restart your computer and check if it works fine.
Check InfoCentre to learn more about your computer. Don’t forget to download your InfoCentre updates!
Depending on your warranty conditions, you might not be allowed to open the chassis by yourself. Please refer to your
Warranty & Service Sheet (if supplied) before proceeding.
If you are sure you want to proceed, please first touch the ground to prevent electrostatic damages and unplug the power
cord before opening the chassis.
Check USB ports.
When the USB connector on the front of the chassis is damaged (for instance when inserting a USB plug upside-down), it
can short circuit the system, thus preventing the computer from starting.
1. To determine whether the USB connector is the root cause of the problem, disconnect the USB cable from the
motherboard. Only do so if your warranty entitles you to and if you are an advanced user.
2. Try to restart your computer and check if it works fine.
3. If it does, replacing the USB assembly of that particular motherboard will solve the problem entirely.
The screen freezes when the Packard Bell logo displays
When the computer starts, it first performs a test of all system requirements. When
the computer is functioning correctly, it emits a short beep and starts up. However,
if the test fails, the computer may freeze when the Packard Bell logo displays.
Restart your computer
Press the ESC key to while the computer starts to display some details.
Set the BIOS to default settings.
Press Del when starting your computer to enter the BIOS. This controls the
hardware of your computer. You should only enter the BIOS if you are an advanced user, or when asked to do so by a
qualified technician.
1. Select Exit in the top menu using the arrow keys or mouse (if available).
2. Select the Default Values in the menu and press Enter. Press OK to confirm.
3. Select Save Changes and Exit and press Enter. Press OK to confirm.
4. The computer will automatically restart.
Try to start your computer with a different boot device.
Press F12 when starting your computer to enter the boot menu (this feature may not be available on all computers). If your
first boot device is HDD, change it into CD or DVD using the arrow keys and press Enter to exit.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Packard Bell iMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Packard Bell iMax in the language / languages: English as an attachment in your email.

The manual is 6,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Packard Bell iMax

Packard Bell iMax Quick start guide - German - 62 pages

Packard Bell iMax Quick start guide - Dutch - 60 pages

Packard Bell iMax Quick start guide - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info