543691
49
Zoom out
Zoom in
Previous page
1/56
Next page
Helpdesk - 49
Returning your system to its factory condition
If your computer experiences problems that are not recoverable by other methods, you may need to reinstall everything to
return your system to its factory condition. You can reinstall using either your hard drive or the recovery discs you have
created.
Caution: This complete recovery deletes everything on your hard drive, then reinstalls Windows and all
software and drivers that were pre-installed on your system. If you can access important files on your
hard drive, back them up now.
If you can still run Windows, see “Recovering from within Windows” below.
If you cannot run Windows and your original hard drive is still working, see “Recovering from the hard drive during startup
on page 49.
If you cannot run Windows and your original hard drive has been completely re-formatted or you have installed a
replacement hard drive, see “Recovering from your recovery discs” on page 49.
Recovering from within Windows
To reinstall Windows and all pre-installed software and drivers:
1. Click on Start > All Programs > Packard Bell, then click on Packard Bell Recovery Management. Packard Bell
Recovery Management opens.
2. Click on the Restore tab, then Restore system to factory default. The Confirm Restoration dialogue box opens.
3. Click on Yes, then Start. A dialogue box displays information about the hard drive that the operating system will be
recovered to.
Caution: Continuing the process will erase all files on your hard drive.
4. Click on OK. The recovery process begins by restarting your computer, then continues by copying files to your hard drive.
This process may take a while, but a Packard Bell Recovery Management screen shows you its progress.
When the recovery has finished, a dialogue box prompts you to restart your computer.
5. Click on OK. Your computer restarts.
6. Follow the on-screen prompts for first-time system setup.
Recovering from the hard drive during startup
To reinstall Windows and all pre-installed software and drivers:
1. Turn on your computer, then press Alt+F10 during startup. Packard Bell Recovery Management opens.
2. Click on Restore system from factory default.
Caution: Continuing the process will erase all files on your hard drive.
3. Click on Next. Your hard drive’s original, factory-loaded contents are recovered. This process will take several minutes.
Recovering from your recovery discs
To reinstall Windows and all pre-installed software and drivers:
1. Turn on your computer, insert the first system recovery disc into your optical disc drive, then restart your computer.
Caution: Continuing the process will erase all files on your hard drive.
2. During startup, press F12 to open the boot menu. The boot menu is where you can select which device to start from, such
as the hard drive or an optical disc.
3. Use your arrow keys to select CDROM/DVD, then press Enter. Windows installs from the recovery disc you inserted.
4. Insert the second recovery disc when prompted, then follow the on-screen prompts to complete the recovery.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Packard Bell EasyNote TV43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Packard Bell EasyNote TV43 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Packard Bell EasyNote TV43

Packard Bell EasyNote TV43 User Manual - German - 62 pages

Packard Bell EasyNote TV43 User Manual - Dutch - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info