492263
21
Zoom out
Zoom in
Previous page
1/56
Next page
19
OPERATING YOUR SET-TOP (cont.)
Using RF bypass
You use RF Bypass to watch the regular (analog) channels that are included in the cable service. RF
Bypass makes these channels “bypass” your set-top and pass directly to the TV and/or VCR.
To use RF Bypass:
Your set-top must be installed with the correct connections from the rear panel to the TV or
VCR (see the note, right); and
The RF Bypass feature must be switched to “On” in the Setup menu (see page 34).
Each time you want to use RF Bypass, you then press the BYPASS button on your remote control
or on your set-top’s front panel. The word BYPASS lights up on the front panel of your set-top.
When you have finished using RF Bypass, press the BYPASS button again.
For you to start using RF Bypass, your set-top must be turned on. However, once set, RF Bypass will
work even if you turn your set-top off.
When RF Bypass is on: you can use the TV’s remote control to tune to any of the available regular
(analog) channels and watch that channel on your TV. This may be a different channel from the
channel that your set-top is tuned to. (When your set-top is switched on, the number of the channel
it is tuned to is shown on its front panel.*) You can record on your VCR the channel that your set-
top is tuned to. This means that, when the bypass is on, you can watch a regular (analog) channel on
your TV and, at the same time, record a different channel on your VCR.
When RF Bypass is off: the channel that you see on your TV is the channel that your set-top is tuned
to. This is the same channel that your VCR receives. So, when RF Bypass is off, you can record only
the channel that you are watching on your TV.
NOTE
If you are not sure whether your
set-top has been set up to allow
RF bypass, check your installation.
If there is a cable (RF cable) going
from the TO TV connector on
your set-top’s rear panel to your
TV (or to your VCR and TV, as
shown by the dashed line on
pages 12 and 13) then RF bypass
is correctly set up.
NOTE
* If the “Front LED Display” (see
page 34) is set to “Current Time”,
you will not see the channel
number. To see the number of
the channel your set-top is tuned
to, you should set “Front LED
Display” to “Current Channel”.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pace TDC777D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pace TDC777D in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info