62846
36
Zoom out
Zoom in
Previous page
1/41
Next page
34
TROUBLESHOOTING
If you are experiencing diculty with your set-top box, check the troubleshooting table below – this may
provide the answer you are looking for.
Problem Possible cause Suggested remedy
The standby light on the
front panel of your set-top
box is not lit.
Your set-top box is not
receiving power.
Make sure that the mains lead is properly
plugged into the back of your set-top box
and the mains supply, and that the mains
supply is switched on.
Check that the mains wall socket has power
(try plugging in a lamp). If it is OK, there may
be a problem with your set-top box.
Your remote control will not
operate your set-top box.
(i) Your set-top box is still in
standby.
(ii) Something is blocking
the path between your
remote control and your
set-top box.
(iii) The batteries in your
remote control need
replacing.
(i) Press the Standby (S) button on your
remote control.
(ii) Check that nothing is blocking the path.
(iii) Replace both batteries in your remote
control. Please remember that used alkaline
batteries must never be thrown into a re.
We recommend disposing of them in an
environmentally-friendly way.
When your set-top box
rst tries to nd and store
the digital channels, you
see the message ‘No signal’
(or some of the publicised
channels are missing from
the Channel Lists).
(i) Your satellite dish is not
properly connected to your
set-top box.
(ii) Your satellite dish is
not pointing in the right
direction.
(i) Make sure that your satellite dish is
properly connected to your set-top box.
(ii) Use the Antenna menu (see page 25)
to make sure that the set-up shown there
correctly reects your installed satellite dish
system. Change the settings if it does not.
(You may need to consult a competent
satellite installation engineer.)
Finally, try scanning for channels again (see
page 29).
When you take your set-top
box out of standby, the
digital channels do not
automatically appear on
your TV.
The AV control setting on
the TV Settings screen may
be set to ‘O.
Set the SCART AV control to ‘On (see page
26), but note that some TVs do not respond
to this AV control setting, so you may have
to use your TVs remote control to choose
the appropriate AV input on your TV.
TROUBLESHOOTING
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pace DS 810 XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pace DS 810 XE in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info