547424
14
Zoom out
Zoom in
Previous page
1/18
Next page
Page 14 of 18
10. Fitting of dish
When all interconnection and fitting is done you have to fit the
dish finally.
Attention: Before the first power up, check if all tools have been
removed from the TopBox. It might be a good idea to have an
assistant watching the TopBox when it is coming up first, if you
do not have direct sight to it when first powering up.
a) Switch on the main power switch on the receiver to "ON" (I).
b) Watch the sat-mouse. If you see a moving bar the antenna will
go up. If you just see a small dot, press the red button on the
remote to get it up. If you see two bars for more than 5 seconds
then something may be wrong with the power supply.
c) Watch the antenna while it is going up. As soon as the arm is
roughly vertical or slightly over vertical press EXIT on the
remote. The antenna has to stop movement immediately.
Be sure to beam the remote towards the sat-mouse while
pressing EXIT and to mount the batteries into the remote before
this operation.
When the arm is approximately vertical and stopped, you can fit
the dish onto the arm.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oyster Digital CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oyster Digital CI in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oyster Digital CI

Oyster Digital CI User Manual - English - 65 pages

Oyster Digital CI User Manual - English - 34 pages

Oyster Digital CI User Manual - German - 53 pages

Oyster Digital CI User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info