547424

Oyster Digital CI Manual

20
Zoom out
Zoom in
Previous page
1/34
Next page
20
Preparation of the channel list
You can change the channel list of the receiver in accordance with your own ideas. We
highly recommend that the channels are grouped according to satellites, as they are in the
pre-installed channel list.
Call up the channel list editor through the menu point “Channel list / Sort channels” in
the main menu.
Once you have completed the required changes, leave at the transmitter list with EXIT.
Confirm the subsequent question with OK in order to store the channel list.
To discard any modifications you have made confirm with SWAP.
In order to change an entry, you must select an entry in the list, then press OK. Then
appears a menu with the available functions.
If you want to work on a complete block of one after other channels, select the option
“Block marking” in the menu. In this case the menu disappears and you will be required
to mark the end of the block in the list. Go to the last entry which belongs to the block
and press OK. Then the menu with the available options will be inserted.
The following are functions are available in the menu:
Copy Copy the transmitter in another position of the transmitter list. The
target entry will be deleted.
Move Move the entry to another position.
Note: if you move an entry upwards, it will appear in front of the
target entry. If you move it downwards, it will appear behind the
target entry.
Delete Deletes a transmitter from the transmitter list. The entry will be
marked in the list as unused. This leaves the numbering of the other
transmitters unchanged.
Cut out Deletes a transmitter from the transmitter list. The following
transmitter returns to the vacated position.
Note: In order to maintain the blocking of the transmitters all the
transmitters only return to the next entry marked “unused”. If the
list of entries from 85 to 99 are not occupied, you can for example
delete entry 57 and only return transmitters 57 to 84. The
transmitters from 100 remain unchanged.
Free
insertion
Only inserts an empty entry. The following transmitters return
correspondingly to the rear.
Note: As with “Cut out” this operation sends all the transmitters
marked “unused” to the end of the block.
Packing This option is only available, if you have marked a block. Within this
block all the gaps with entries marked “unused” will be moved as
transmitters are inserted above. The empty entries are then to be
found gathered together at the end of the block.
With the functions concerned with a target entry, following the selection of any menu
point, you will be required to select the target entry. You do this, by going to the entry in
the list and confirming with OK. Providing you have not completed a function, you can
return to the previous step with the EXIT button.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oyster Digital CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oyster Digital CI in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oyster Digital CI

Oyster Digital CI User Manual - English - 65 pages

Oyster Digital CI Installation Guide - English - 18 pages

Oyster Digital CI User Manual - German - 53 pages

Oyster Digital CI User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info