Manual Overmax X-bee drone 5.1 (page 6 of 59) (English, Polish)

649985

Zoom out

Zoom in

1/59

5. TRANSMITTER - RECEIVER SYNCHRONIZATION AND CALIBRATION

Step 1

Switch the controller's power button to "ON" position. The LCD dis

play turns on and the LED starts to blink.

Push the throttle stick from the lowest to the highest position, and then push it back to the lowest position.

The LED starts to glow steadily, then blinks.

Step 2

Turn on the drone using the switch located o

n the underside by

moving it to "ON" position. The quadrocopter's lights switch on.

The controller emits a beep sound indicating correct

synchronization with the receiver and the LED starts to glow

steadily. Place the drone on a flat surface to ensure the

gyroscope is centered. Do not move the drone during the

synchronization process.

Step 3

To calibrate, move the direction stick to the bottom right corner and wait

until the drone's LEDs stop to blink. Now, the calibrated drone is ready to

fly.

Step 4

After the flight, move the controller's switch to "OFF" position (the power LED and the display go off). Then,

power off the drone using the same method

- move the power switch located on the bottom of the drone to

"OFF" position. The lights will go off i

ndicating that all the systems are off.

6. OPERATING THE DRONE

Flying up / down

Move the throttle stick forward

to fly the drone up.

Move the throttle stick

backward to fly the drone

down.

Rotating left/ right

Move the throttle stick left /

right to rotate the drone in a

given direction.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Overmax X-bee drone 5.1 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Overmax X-bee drone 5.1 Manual

Product: