649983
5
Zoom out
Zoom in
Previous page
1/33
Next page
4. CHARGING THE BATTERIES
Use the included cable to charge
the battery of the drone.
** Use ONLY the supplied USB cord for
charging.
Battery charging should always be done
under adult supervision, and via computer's
USB port only.
LED indicator
Red
- on
Red
- off
Charging...
Charging completed
Charger specifications
Input
Charging current
Maximum voltage
5V
500mAh
4.2 ± 0.03V
Battery usage and charge duration reference
Battery type
Battery specification
Single charge
working time
Charging time
Rechargeable lithium
-
polymer battery (Li
-Poly)
3.7V / 600mAh
Drone flight time: up to
12 minutes
About 90 minutes (charging
current approx.
0.5 A)
Zinc
-carbon battery
(Non
rechargeable)
1.5V
(GP 15G R4P)
Controller (transmitter)
operation time: 18
hours
Non rechargeable (do not
charge)
5. TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Turn on the drone using the switch located on the back by moving it to "ON" position. Pla
ce the drone on a
flat surface to ensure the gyroscope is centered.
Do not move the drone during the synchronization process.
Step 2
Switch the controller's power button to "ON" position. The LED indicator starts to blink. Wait 5 seconds until
the
synchronization process starts.
Push the throttle stick from the lowest to the highest position, and then push it back to the lowest position.
When the LED indicator stops blinking and starts to glow steadily it means that the synchronization process is
finished.
Step 3
After the flight, move the controller's switch to "OFF" position (the power LED is off). Then, power off the
drone using the same method
- move the power switch located on the back of the drone to "OFF" position.
The lights will go off indi
cating that all the systems are off.
6. FLIGHT CONTROL
Mode
Mode
Left / right
Throttle stick
Ascent / descent,
Rotate left / right
Fly forward / backward
Direction / rotation
control stick
Left
Right
360-degree stunts
When you press the Flip button the controller's red LED indicator starts to blink fast indicating that the drone is
in 3D flip mode.
When in 3D flip mode, move the direction stick forward, backward, left or right to flip the drone in the chosen
direction.
Speed modes
The device supports two flight speed modes. Press the flight speed button to switch between fast and slow
mode. The current speed mode is indicated by the number of beeps (at the moment of switching) and a
corresponding icon on the display ("L" for slow and "H" for fast mode).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Overmax X-bee drone 3.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Overmax X-bee drone 3.2 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info