649976

Overmax X-bee drone 2.3 Manual

4
Zoom out
Zoom in
Previous page
1/22
Next page
-carbon battery
1.5V
(GP 15G R4P)
Controller (transmitter)
operation time: 18
hours
Non rechargeable (do not
charge)
5. TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Connect the battery to the drone
in order to power it on. Place the drone on a flat
surface to ensure the gyroscope is centered. Do not move the drone during the
synchronization process.
Step 2
Switch the controller's power button to "ON" position. The LED indicator starts to
blink.
Wait 5 seconds until the synchronization process starts.
Push the throttle stick from the lowest to the highest position, and then push it
back to the lowest position. When the LED indicator stops blinking and starts to
glow steadily, and the controller em
its a beep sound, it means that the
synchronization process is finished.
Step 3
After the flight, move the controller's switch to "OFF" position (the power LED is
off). Disconnect the battery to turn the drone off. The lights will go off indicating
that
all the systems are off.
6. FLIGHT CONTROL
Description
Rotate left / right
Ascent / descent
Altitude control (ascent / descent)
Rotate left / right
Fly forward / backward
Left / right
Flying forward / backward
Flying left / right
Speed modes
The device supports two flight/drive speed modes. Press the flight/drive speed button to switch between slow
and fast mode. The number of beeps inform about a currently chosen mode (one beep - slow mode; two
beeps - fast mode).
Flight / drive mode
The device supports both the flight and drive mode. The default mode (after the device is powered on) is the
flight one. To activate the drive mode, press the flight / drive mode button. The remote control beeps twice
indicating the mode change. Press this button again to return to the flight mode. The remote control beeps
once indicating the mode change.
NOTE: to be able to ride on walls and ceilings, activate the flight mode.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Overmax X-bee drone 2.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Overmax X-bee drone 2.3 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info