Manual Overmax Motocam 3.0 (page 7 of 43) (English, Polish)

649995

Zoom out

Zoom in

1/43

NOTE:

Once the converter is connected to the power supply, the red

charging LED is on in all modes except the situation when the built-in

battery is fully charged.

Initial settings

1. Make sure your Motocam 3.0 is switched off before inserting or

removing a Micro SD card!

2. Open the cover of the Micro SD card slot.

3. Insert a micro SD memory card (up to 64GB (FAT32)) into the slot with

the contacts facing up.

4. If there is no micro SD memory card installed in the camera, the status

LEDs flash red and blue, and the camera turns off after 30 seconds.

5. A micro SD memory card that has been used in another device may

not work properly with your camera. If you are going to use a given

micro SD memory card with your Motocam 3.0 for the first time, please

use your computer to format it to FAT 32 file system. We recommend

using Micro SD cards with a Speed Class 6 or higher.

Battery charging

The device is equipped with a built-in lithium-polymer (Li-Poly)

battery. The red charging LED turns on when charging and turns

off once the battery is fully charged. When the charging LED

starts flashing blue, it means that the battery power is low. The

battery is being charged with the current flowing from the

converter connected to the power of the motorcycle. The

camera can also be charged with an external 5V power supply

or power bank with a minimum nominal power of 2A. The

camera turns on automatically during charging. In order to

charge it faster, please turn off the camera manually.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Overmax Motocam 3.0 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Overmax Motocam 3.0 Manual

Product: