650026

Overmax Camspot Recorder 2.1 Manual

65
Zoom out
Zoom in
Previous page
1/72
Next page
10
Appendix
10.1 Port Mapping
Port mapping is mapping a port of outside web host’s IP address to a machine inside web, and provide the service.
When user connects to the port of the IP, the server will automatically map the request to the corresponding
machine inside LAN. With this function, we can map many ports of a machine’s IP address to different machines’
different ports inside web. The port mapping can also have other special agent functions, like POP, SMTP, Telnet
and so on. Theoretically, it can provide more than sixty thousand ports. For example, if we want to map a web
server which has an IP address of 192.168.111.10, we just need to input the IP address and TCP port 80 into the
port mapping chart of the router. There are two ways to map the port: UPnP function automatically map and
modify the router’s port mapping chart by manual.
10.1.1 UPNP Function
In order to get connection to the Embedded DVR through Public network, we need to set the Router to cross the
NAT of Embedded DVR. UPnP can make the NAT cross automatically by the UPnP agreement of Embedded
DVR, and don’t have to set the Router.
Note: to realize the UPnP Function, there must be Router support and enable the UPnP Function.
The first step
Connect the Router to the network, get to the Menu of the Router, set the Router, and enable the UPnP Function.
Routers made by different manufacturers may have some difference, please refer to the specification carefully
before setting the Router.
The second step
Connect the Embedded DVR to the Router; the configuration will automatically gain the IP address or static IP.
After setting up the IP, click the Advanced. And get to the XXX, ports and multicast etc. choose to open the
Enable at the [UPnP port mapping]
The third step
Enter into the Router management interface; detect the port if there is already a Port mapping. If there is, it shows
UPnP setting’s finished.
The forth step
Input the IP address in IE, and add port number of the Embedded DVR, for example: 155.157.12.227:81. If you
want to enter by the Client Software, use the TCP port offered by the outer net.
Note: if there are a few embedded DVRs need to set the UPnP function, in order to avoid IP conflict, set the
ports of embedded DVR into different ports numbers. Otherwise, it will choose the embedded DVR port set
preceded as the first choice.
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Overmax Camspot Recorder 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Overmax Camspot Recorder 2.1 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info