812557
19
Zoom out
Zoom in
Previous page
1/34
Next page
6.5 Adjusting the brake force for rear wheel with drum brake
The brake force is adjusted at the adjustment screw to achieve optimal braking effect. The brake
force is increased by turning the screw counter-clockwise and decreased by turning the screw
clockwise.
INFORMATION!
Turn the adjustment screw counter-clockwise until frictional noise occurs at the tur-
ning wheel. Then tighten the adjustment screw until the frictional noise disappears.
The wheel should run freely.
After finishing the adjustment, fasten the adjustment screw by tightening the counter nut.
INFORMATION!
Ensure that the brake force of both rear wheels is adjusted equally.
Also make sure that the drum brake engages with sufficient force only when the
manual brake lever is set to the second ratchet position.
6.6 Adjusting the angle of the footplate (Fig. 28)
INFORMATION!
Prior to adjusting the footplate angle, loosen the screw connections A as indicated
in the figure.
Then set the footplate to the desired angles and tighten the loosened screw connec-
tions with a torque of 6 Nm.
51
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock start M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock start M5 in the language / languages: English as an attachment in your email.

The manual is 1.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Otto Bock start M5

Otto Bock start M5 User Manual - German - 36 pages

Otto Bock start M5 User Manual - Dutch, French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info