812552
17
Zoom out
Zoom in
Previous page
1/34
Next page
When changing the adjustments originally made in the factory, two other component groups of
the wheelchair must be readjusted, refer to sections 6.3 and 6.4.
6.3 Caster wheels
Adjusting the caster wheel journal angle (Fig. 26)
After the rear wheels have been mounted in the appropriate position, the caster wheel journal
angle must be readjusted.
The threaded axle should be as horizontal as possible in relation to the ground to ensure optimal
driving behavior of the wheelchair. The caster adapter allows for continuous angle adjustment.
INFORMATION!
Loosen the two screws A between caster adapter and frame (Fig. 26).
Now you can move the caster adapter along the frame tube. The level (included
in delivery) will help you position the threaded axle as vertically to the ground as
possible.
INFORMATION!
Make sure to firmly retighten all oval head screws. The proper torque is 8 Nm
(Fig. 26).
26
A
49
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Start - Serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Start - Serie in the language / languages: English as an attachment in your email.

The manual is 1.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Otto Bock Start - Serie

Otto Bock Start - Serie User Manual - German - 36 pages

Otto Bock Start - Serie User Manual - Dutch, French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info