682691
63
Zoom out
Zoom in
Previous page
1/68
Next page
63
Mounting (Fig. 53)
Place the protective rim band over the valve. Then push the valve through the rim. Screw on
the valve nut, if there is one. The rim band can then be easily applied.
Ensure that all spoke ends are covered.
Tires
(Fig. 54)
Beginning behind the valve, place the lower side of the tire over the edge of the wheel rim.
Pump the tube with a small amount of air until it assumes its round shape. Then insert it into
the tire.
Check the inner tube for folds. If folds are present, release some air. Now you can easily
install the upper side of the tire starting across from the valve, using both hands and working
towards the valve.
53
54
Inating
Check around the tire on both sides to ensure that the tube is not clamped between the edge
of the tire and the rim.
Push the valve back slightly and then pull it out again such that the tire is well-seated in the
valve area.
Inflate the tire until it can still be pressed easily with your thumb. If the control line on both sides
of the tire is equally distanced to the rim, the tire sits centrally. If the tire does not sit centrally,
let out some air and realign the tire. Then inflate the tire to the pressure indicated on the side
wall and tighten the dust cap.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Motus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Motus in the language / languages: English, German as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info