682691
55
Zoom out
Zoom in
Previous page
1/68
Next page
55
Open the screw connection of the eccentric. Place the bubble level on the caster wheel journal
and adjust the eccenter with a screwdriver (fig. 38). Retighten all screw connection and put on
the cover caps.
INFORMATION
The proper torque for tightening the screws is 8 Nm.
35
36
37
38
6.4 Adjusting the Wheel Lock (Fig. 39)
To change the position of the rear wheels, first loosen the attachment screws of the clamping
adapters of the wheel lock and push the wheel lock forward. Then reposition the rear wheels. The
wheel lock should then be remounted such that the distance between the tires and wheel lock bolts
is max. 5 mm when the wheel lock is not activated (fig. 39; subject to technical changes).
CAUTION
Accident risk. The wheel locks are only effective with sufficient air pressure and proper
adjustment. The proper air pressure is indicated on the side wall of the tire. It should be at least
7 bar (350 kPa). To ensure sufficient braking effect, use only original rear wheels with an ap-
proved radial excursion of maximally ± 1 mm.
INFORMATION
Make sure to firmly retighten all screws and nuts after making adjustments.
INFORMATION
Tighten the wheel lock attachment with a torque of 10 Nm.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Motus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Motus in the language / languages: English, German as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info