682694
26
Zoom out
Zoom in
Previous page
1/88
Next page
26
If a tire becomes flat, use the appropriate tools to carefully remove the tire from the rim.
Be sure not to damage the rim and the tube.
Repair the tube according to the directions in the repair kit, or replace the old tube with a new one.
Before re-mounting the tire, inspect the inner rim surface and the inside of the tire for any object that may have
caused the flat.
Be sure the rim bands are not damaged. They protect the tube from being damaged by the ends of the spokes.
To keep the brakes operational, please use only original rear wheels.
Mounting (Fig. 41)
Place the protective rim band over the valve and then push the valve through the rim. Screw on the valve nut if there
is one. The rim band can now be easily applied.
Be sure all spoke ends are covered.
Start pressing the underside of the tire over the edge of the rim behind the valve. Pump the tube with a small amount
of air until it is round; then insert it in the tire.
Check the tube for folds. If folds are present, release some air. You can now mount the rest of the tire starting with
the section of tire opposite the valve by gently pressing the tire toward the valve.
Inating (Fig. 42)
Check around the tire on both sides to see whether the tube is clamped between the edge of the tire and the rim. Push
the valve back slightly and pull it out again so that the tire is well-seated in the valve area. Fill the tire with enough air
so that it can be pressed in easily with your thumb. Be sure the tire is centered on the rim before continuing. If not,
let some air out and realign the tire. Inflate the tire to the pressure indicated in the table on page 26, and tighten the
dust cap.
Liability
The manufacturer’s warranty applies only if the product has been used under the conditions and for the purposes
described. The manufacturer recommends that the product be used and maintained according to the instructions for
use.
The manufacturer is not responsible for damages caused by components and spare parts not approved by the ma-
nufacturer. Repairs must be carried out exclusively by authorized dealers or by the manufacturer.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Dino 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Dino 3 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info