682669
214
Zoom out
Zoom in
Previous page
1/224
Next page
214 | Ottobock
Maintenance, cleaning and disinfection
C1000 DS
9.3.2 Drive wheel replacement
Proceed as follows:
1. Turn off the control unit.
2. Raise the power wheelchair, e.g. using a jack, so that
the wheel being replaced can turn freely.
3. Loosen the four Allen head screws using an Allen
wrench size 6 and remove them including the spring
washers.
4. Pull the drive wheel forward off the wheel hub.
5. Push the new drive wheel onto the wheel hub.
6. Put the spring washers on.
7. Alternately tighten the four Allen head screws crosswise.
8. Check proper tightness with a torque wrench.
INFORMATION
When reassembling the wheel, tighten the screws to a
torque of 25 Nm.
Figure 54 Removing the drive wheel
9.3.3 Replacing the casing and/or tube for
pneumatic tyres
The wheel rims are in two parts and can be separated by
removing the Allen head screws. Proceed as follows:
1. Remove the wheel in question from the power wheel-
chair (see Section 9.3.1 and 9.3.2).
2. For pneumatic tyres: Let all the air out of the tyre.
3. Loosen all ve Allen head screws that connect the two
parts of the rim to each other using an Allen wrench
size 6. Remove the screws.
214


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock C1000DS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock C1000DS in the language / languages: English, German as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Otto Bock C1000DS

Otto Bock C1000DS User Manual - Dutch - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info