Manual Otto Bock Avantgarde Ti Ultra (page 80 of 96) (English, German)

682689

Zoom out

Zoom in

1/96

Abb.1 Abb. 2

III

Abb. 3 Abb. 4

Mount the receiver tube with the two screws (Fig. 1, item 1) on the inner side of

the posterior frame part. Tighten the nuts (Fig. 1, item 2) with a torque of 9 Nm.

Insert the expansion spring (Fig. 2, item 4) with the close eyelet into the receiver

tube. When the receiver tube‘s bore hole and the eyelet hole are flush, insert the

sleeve (Fig. 2, item 3). Secure the sleeve with the screw (Fig. 3, item 7). Tighten

the nut (Fig. 3, item 8) with a torque of 7 Nm.

Hook a cord (Fig. 3, item 10) into the lower eyelet of the expansion spring and

push the anti-tipper tube (Fig. 2, item 6) over the cord and expansion spring into

the receiver tube.

Pull at the cord (Fig. 3, item 10) until the expansion spring extends from the anti-

tipper tube (Fig. 2, item 6).

Secure the expansion spring using a screwdriver (Fig. 4, item 11) and remove the

cord. Put the spring holder (Fig. 4, item 12) onto the lower eyelet of the expansion

spring. Remove the screwdriver and the eyelet of the expansion spring will lock in

place.

Mounting the Anti-tipper

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde Ti Ultra in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde Ti Ultra Manual

Product: