Manual Otto Bock Avantgarde T (page 74 of 96) (English, German)

682687

Zoom out

Zoom in

1/96

0°

2°

4°

Adjusting the Wheel Camber

(does not apply to XXL 2 and Ti Ultra, since with the XXL 2 and Ti Ultra only 0° is possible)

The modular system of the Avantgarde offers a rear wheel adapter that can be used to set the

rear wheels at different camber angles (0°, 2° and 4°). The larger the negative camber of the

rear wheels is, the more responsive and maneuverable the wheelchair becomes. The wheel

camber provided by the rear wheel adapter is 2°. Deviations from this adjustment (0°, 4°) can

be attained by turning the mounted special 2° tapered camber washers.

Adjusting 0° Rear Wheel Camber

Position the tapered washer on the outer side of the rear wheel adapter with the thicker side

up in the desired locking position (from the outer side you can read the engraving »-2°«). Place

the second tapered washer on the inner side of the rear wheel adapter with the thinner side up

in the corresponding locking position (from the inner side you can read the engraving »+2°«).

The outer sides of the two camber washers are parallel now (see sketch). Insert the rear wheel

fitting, put on the lock washer from the inner side and slightly tighten the hexagon nuts (Fig. 58,

items A, C). Check the distance between rear wheel and side panel and adjust by turning the

fitting. Finally tighten the hexagon nuts with a torque of 50 Nm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde T in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde T Manual

Product: