812558
33
Zoom out
Zoom in
Previous page
1/56
Next page
87 88
3.9 Assembly E: Side Panels
3.9.1 Replacement Work on the Standard Side Panel/Clothing Protector
3.9.1.1 Replacing the Standard Side Panel/Clothing Protector
1) Remove the rear wheel.
2) At the back tube unscrew the size 5 Allen head screw from the side panel (see Fig. 89).
3) Unscrew the mounting screw on the adjustment disc and remove the cover of the adjustment disc (see Fig. 90).
4) Remove/replace the side panel.
89 90
Installing/adjusting the side panels
Fine adjustment of the side panels to the rear wheel position is required during installation:
1) If necessary, slightly loosen the slide block on the bottom of the frame (see Fig. 91).
2) Connect the side panel mounting on the back tube to the side panel – do not tighten (see Fig. 89).
3) Push on the rear wheel to determine the position.
4) Adjust the position:
Front: Find the position of the adjustment disc relative to the mounting point (see Fig. 92).
Rear: Adjust the angle (see Fig. 93).
Slide block: If necessary, adjust the depth position (see Fig. 94, item 2).
5) Push the cover onto the adjustment disc (see Fig. 94, item 1). The marks on the disc help to find the position.
6) Securely retighten all the screws.
7) Push on the rear wheel and ensure that it can rotate freely.
After adjustment of both side panels, both rear wheels must rotate freely without scraping noises.
3302/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info