812558
30
Zoom out
Zoom in
Previous page
1/56
Next page
3.8.1.4 Retrofitting the Folding Push Handles
1) Remove the old push handle.
2) Remove the back pad.
3) For adaptable back upholstery: Open/remove the uppermost strap.
4) Insert the folding push handle into the back tube and bolt down the 2 size 5 Allen head screws (see Fig. 76).
5) For adaptable back upholstery: Mount the uppermost strap on the push handle and secure with hook-and-loop
fastener (see Fig. 77).
6) Put the back pad back on.
76 77
3.8.1.5 Replacing the Rubber Hand Grips
1) Carefully cut the old rubber hand grip open (see Fig. 78).
2) Remove the old rubber hand grip and material residue from the back tube.
3) Clean the tube end with solvent.
4) Open the two-component adhesive package. Follow the instructions provided by the adhesive manufacturer.
5) Use a spatula to apply half of the adhesive to the inside of each of the rubber hand grip. Spread evenly around the
grip opening up to a depth of approx. 4–5 cm.
6) Turn the handles while pushing them onto the tube ends.
7) Allow the adhesive to harden for approx. 24 h before handing the wheelchair over to the user.
78
3.8.2 Replacing the Back Upholstery
3.8.2.1 Replacing the Back Upholstery, Standard
1) Remove the push handles.
2) Remove the side panels (see Page 33ff; desk side panel example: see Fig. 79).
30 02/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info