812558

Otto Bock Avantgarde CV Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
3.6.3 Replacement Work on the CS/CLT Model
3.6.3.1 Replacing the Foot Rest Bar
1) Unscrew/remove the size 5 Allen head screw on the inside of the front frame (see Fig. 53).
2) Remove and replace the foot rest bar (see Fig. 54).
3) The foot rest bar must be pushed at least 60mm into the swivel segment.
4) Tighten the screws to 8 Nm.
53 54
3.6.3.2 Replacing the Foot Plate
1) Unscrew the size 5 Allen head screw at the under foot rest bar (see Fig. 55).
2) Remove the foot plate (see Fig. 56).
3) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to 10Nm.
55 56
3.6.3.3 Replacing the Foot Plate
The instructions for the CV model apply (see Page 22).
3.6.3.4 Replacing the Tube Foot Rest
1) Flip up the tube foot rest.
2) Release and flip up the lateral cover for the angle adjustment (see Fig. 57, item 1).
3) Unscrew the size 5 Allen head screw (see Fig. 57, item 2).
4) Remove/replace the tube foot rest from the lateral mounting (see Fig. 58).
5) Position the tube foot rest in place and tighten the Allen head screw to 10Nm.
6) Set the width of the tube foot rest by adjusting the screw (see Fig. 59).
7) Flip down the tube foot rest and close the lateral cover for the angle adjustment.
2502/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info