812558
23
Zoom out
Zoom in
Previous page
1/56
Next page
3.6.2.5 Replacing the Locking Device
1) Remove the foot rest.
2) Unscrew the size 4 Allen head screw on the locking device (see Fig. 45).
3) Remove/replace the locking device.
4) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to 5Nm.
3.6.2.6 Retrofitting the Heel Strap
1) Remove the foot rest.
2) Unscrew the Phillips head screw on the heel strap holder (see Fig. 46).
3) Remove/replace the heel strap holder and the heel strap.
4) To reassemble, perform these steps in reverse order.
46
3.6.2.7 Elevating Foot Rest with Automatic Length Adjustment
3.6.2.7.1 Retrofitting the Elevating Foot Rest
1) Remove the foot rest.
2) Tighten the retaining bolt with shell and size 4 Allen head screw on the frame (see Fig. 47).
3) Insert the elevating foot rest with automatic length adjustment into the frame. In doing so, keep the foot rest swung
outward by 90° (see Fig. 48).
4) Swing the elevating foot rest inward and press down.
47 48
3.6.2.7.2 Replacing the Foot Rest Bar
1) Remove the Allen head screw from the foot rest bar (see Fig. 49).
2) Select one of the 3 threaded bores.
INFORMATION Depending on the setting it may be necessary to add or remove one or more spacer sleeves.
2302/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info