812558
18
Zoom out
Zoom in
Previous page
1/56
Next page
3.5.3.2 Adjustment of the anti-tipper
Height adjustment of the anti-tipper
1) Unscrew the mounting screw of the anti-tipper tube from the accessory mount (see Fig. 22, item 2).
2) Move the anti-tipper tube in the vertical accessory mount.
3) Bolt down the anti-tipper tube. The distance between the anti-tipper rollers and the ground must be 5 cm maximum
(see Fig. 23).
Angle adjustment of the pivot arm
1) Remove the pivot arm mounting screw from the anti-tipper tube (see Fig. 24, item 1).
2) Move the pivot arm to a new position (3 setting possibilities: (see Fig. 24, item 2). The distance between the anti-
tipper rollers and the ground must be 5 cm maximum.
3) Bolt down the pivot arm.
Longitudinal adjustment of the pivot arm
1) Press the button on the pivot arm (see Fig. 25).
2) Adjust the length of the pivot arm. In doing so, the rocker's outer arm should protrude beyond the largest diameter
of the tyre (see Fig. 26).
3) Allow the button to engage.
23 24
25 26
3.5.3.3 Replacing the Pivot Arm
1) Unscrew the screwed tube connection to the pivot arm (see Fig. 27) through the service opening (see Fig. 28).
2) Remove and replace the pivot arm.
3) To reassemble, perform these steps in reverse order. Tighten the pivot arm screw connection to 4Nm.
18 02/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info