812558
11
Zoom out
Zoom in
Previous page
1/56
Next page
All instructions concerning the adjustment of the parts installed are included in the Instructions for Use (qualified per
sonnel) – order number 647G585.
3.2 Required Tools and Accessories
The following tools are required in order to perform the service work:
Reversible ratchet handle wrench and sockets (sizes: 8 – 24)
Torque wrench (measurement range: 5 – 50 Nm)
Wrench (size: 8 – 24)*
Allen wrench (size: 2.5 – 6)**
Screwdriver (blade width: 2.5/3.5/5 mm)
Phillips head screwdriver (size: 2)
Hammer (approx. 300 g); plastic hammer
Pliers: cutting pliers, combination pliers, snap ring pliers
Pin punch, ø 3/4/5/6 mm
Drill/twist drill ø 3.2/5/5.2/6 mm
Stanley knife with sickle hooked blade and standard blade
Tyre mounting levers and inner tube repair kit*
Workbench and vice with plastic jaws and rubber insert
Measurement equipment: rule, spirit level
Liquid thread locker, "medium" and "strong"
* Included in the tool set 481C08=ST010
** Size 3 – 6 included in the tool set 481C08=ST010
3.3 Special features of the Avantgarde CLT
Lightweight construction was strictly applied in the design of the Avantgarde CLT ultra-light active wheelchair. This
necessitates the greatest possible care during adjustment.
In particular the tightening torques for the bolts of high-strength aluminium alloy must be strictly observed (see table).
Bolt diameter (mm) Maximum torque for aluminium bolts (Nm)
6 5.5
8 13
Before re-assembly and re-use of the aluminium bolts, inspect the threads for damage. We recommend that new alu
minium bolts are used at each (re-)assembly.
Use a liquid bolt locking compound on the aluminium bolts (e.g. Loctite 241®).
3.4 Maintenance Schedule
Maintenance schedule Type of wheelchair: Customer:
Item Area Inspection (checklist)
SN: 1. Function/setting
(depending on equipment)
2. Inspected for dam
age/deformation
3. Screw connections
inspected
Frame Frame x x
Anti-tipper x x
Crutch holder x x
Tip-assist x x
Crutch holder x x
A
Frame accessories
Frame pad x
Folding mechanism x x
Lower leg length setting x x
Foot rests
Angle adjustment x x
Plastic plate x x
B
Foot rest accessories
Lateral heel blocks x x
1102/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info