Manual Otto Bock Avantgarde CLT (page 42 of 56) (English)

812560

Zoom out

Zoom in

1/56

127 128

3.11.2.2 Installing the Fitting

The rear wheel can be installed at 12 height positions in the rear wheel adapter.

1) Slightly loosen the nuts on both sides of the fitting (see Fig. 129, see Fig. 130).

2) Pull the camber washers apart until the fitting can be moved (see Fig. 131).

3) Move the fitting together with the nuts and camber washers into the desired position.

4) Pay attention to the following when installing the fitting (see Fig. 131):

→Position the camber washer teeth offset from one another.

→Position the camber washer groove as parallel and upright as possible.

5) Insert the spirit level holder into the groove (see Fig. 132, item 1).

6) Insert the spirit level and align the camber washers upright (see Fig. 132, item 2).

7) Tighten the nuts on both sides of the fitting to 50 Nm.

→Once changed, the left and right fitting must have the same vertical position in the rear wheel adapter.

129 130

42 02/2011

Service Work

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CLT in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde CLT Manual

Product: