682693
18
Zoom out
Zoom in
Previous page
1/40
Next page
6.5 Seat cushion and back upholstery
WARNING
Seat cushion and back padding may ignite
Burns due to user error
The seat and backrest upholstery as well as padding fulfil the requirements for flame resistance according to
the norms ISO 8191-2 or DIN EN 1021-2. However, they may still ignite if fire is handled improperly or negli
gently.
Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair. It was chosen by
qualified personnel according to the needs of the user.
6.6 Side panels
CAUTION
Pinching at the side panels
Pinching, crushing due to lack of caution in danger areas
Pay attention not to pinch parts of your body between the side panel or frame parts.
The side panels protect the user and his/her clothing from getting dirty.
If armrests have been installed on the wheelchair, they offer the user additional support for the forearms.
6.6.1 Adjusting the armrest height
The armrest height can be changed without the use of tools.
1) Pull the release lever in the round opening of the side panel upwards.
2) Push the armrest to the desired position.
3) Let go of the release lever. The armrest locks into place automatically.
6.6.2 Removing the side panels
To make getting into the wheelchair easier and for transportation, the side panels can be removed.
CAUTION
Incorrect use of the side panel
Health hazard, risk of breakage of the side panel mounting due to incorrect use
Fold the side panel down such that it engages audibly in the side panel mounting.
INFORMATION
When using desk side panels in combination with an angle-adjustable back, the back angle can only be adjusted
from -3° to +15°.
Folding back/removing
To make getting into the wheelchair easier the side panels can be folded up and removed:
1) Press the release lever of the desk side panel (see fig.18).
2) Fold up the desk side panel by approx. 90°.
3) Turn the desk side panel towards the backrest and pull it out of the side panel mounting (see fig.19).
18
Use
Avantgarde 4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde 4 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Otto Bock Avantgarde 4

Otto Bock Avantgarde 4 User Manual - German - 48 pages

Otto Bock Avantgarde 4 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info