682693
13
Zoom out
Zoom in
Previous page
1/40
Next page
It is not necessary to disassemble or fold up the wheelchair.
During extended storage, the knee lever wheel lock on wheelchairs with PU tyres (=tubeless tyres) must be
released since tyre deformation may otherwise result.
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents, acids,
etc.).
5 Preparation for use
5.1 Assembly
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
When folding the wheelchair out or together, only grip by the specified components.
CAUTION
Failure to verify readiness for use before putting into operation
Tipping, falling due to incorrect adjustment or installation
Before you start using the wheelchair for the first time, check the chosen wheelchair settings with the support
of qualified personnel.
After every assembly, check for proper mounting of the rear wheels. The quick-release axles must be securely
locked in the receiver bushings.
Pay particular attention to the stability against tipping, free running of the rear wheels and correct function of
the wheel locks.
Check the tyre pressure. The correct tyre pressure is printed on the sidewall. Ensure that the pressure is the
same in both tyres.
INFORMATION
On the topic of disassembly/transport: see Page25.
It only takes a few simple steps to prepare the wheelchair for use:
1) Attach the rear wheels to the quick-release axle mounting (see fig.3). The quick-release axles must not be
removable after releasing the push-button.
INFORMATION: For the "lock-release assist" option, see the section "Rear wheels".
2) Loosen the safety strap (see fig.4).
3) Unfold the wheelchair (see fig.5).
INFORMATION: While you are next to the wheelchair, tip it slightly toward you and press on the edge
of the seat upholstery closest to you.
4) If necessary: Attach the legrests (see Page16).
Fold down the footplates. When using a single-panel footplate, be sure the support of the footplate is locked
into the receiver (see fig.6).
5) Fit the seat cushion (see fig.7). The seat cushion is secured against sliding by being pressed on to the hook-
and-loop fastener.
3 4
13Avantgarde 4
Preparation for use
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde 4 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Otto Bock Avantgarde 4

Otto Bock Avantgarde 4 User Manual - German - 48 pages

Otto Bock Avantgarde 4 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info