682682
33
Zoom out
Zoom in
Previous page
1/38
Next page
32
Fast flashing of LEDs 1-8 Error of control unit Check the plug connection
Fast flashing of LEDs 1-9 Brake has been released Lock the brake or check the motor
plug connection
Fast flashing of LEDs 1-10 Overvoltage on the control unit Check the battery plug connection
11 A200 Standard Version
The functions of the standard version are described in section 6.2 "Disassembling the A200 Power
Wheelchair", section 7 "Adjustment Possibilities", and section 9 "Putting into Operation".
12 Options
The A200 has been designed as a modular system.
For accessories and options please refer to the order form.
The options and adjustment possibilities are described in the following.
12.1 Control Panel
12.1.1 Control Panel, swing-away
To allow the user to drive closer to a table or even below the edge of a table, the control panel can be swung
to the side with a special control panel holder. A light pressure from the side on the control panel body will
disengage the holder which now can easily be swung to the rear in parallel. When bringing the control panel
back to its original position, the pivot element engages automatically.
12.2 Pelvic Belt
The A200 can be equipped with a pelvic belt. The pelvic belt serves exclusively for fixation when driving the
power wheelchair. The belt must never be used as a safety belt for the user when being transported in the
wheelchair in a motor vehicle.
12.3 Other Options
• Contoured seating systems
Increased sitting comfort
Headrest mounting kit
Headrests of our Accessories Catalogue
These and other optional add-on components are described on the order form and in the Accessories
Catalogue.
13 Maintenance and Cleaning
13.1 Maintenance
The correct function of the A200 should be checked before every use. The checks listed in the following table
must be carried out by the user at the indicated intervals. Failure to carry out these simple checks may lead to
problems arising that could invalidate the warranty.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock A 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock A 200 in the language / languages: English, German as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info