Manual Oster OPB9000 Versa (page 7 of 12) (English)

654215

Zoom out

Zoom in

1/12

USING YOUR PRODUCT

Tamper – The tamper allows you to accelerate the process of very thick and/

or frozen mixtures that cannot be processed in a regular blender. If food is not

circulating the machine may be overloaded or may have a trapped air bubble. Using

the tamper helps to maintain circulation by preventing air pockets from forming.

While the machine is running, remove the filler cap, and through the hole in the lid

insert the tamper and use it to press ingredients into the blades as you make frozen

ice creams, nut butters, etc.

The container should not be more than 2/3 full when the tamper is used during

blending.

Do not use tamper for more than 20 consecutive seconds (to avoid stressing the

motor).

You may need to move the tamper not only up and down, but also side to side.

Interlock – The unit is supplied with an interlock on the base. This will prevent the

motor or the control panel from starting if the blender jug is not properly placed on

the base.

If the jug is removed from the base during operation the unit will stop. To restart the

blender, turn the speed dial to “Off”, place the jug on the blender base and select

the preferred speed to begin again. The motor will not restart unless the unit is

turned OFF first.

Blending Tips

• Do not operate for more than 10 minutes at a time.

• Jug should be at least 25% full at all times for optimal performance.

• Filler cap should always be assembled to the lid and locked when blending on

the soup program.

• Use High speeds as much as possible for whole food juices, soups, shakes,

frozen mixtures, making purées and nut butters. Processing times will generally

be less than one minute (most take less than 30 seconds). High speed provides

the best quality of refinement, breaking down ice, frozen fruit, whole fruits or

vegetables to a smooth lump-free consistency.

• Never blend without the lid firmly in place on the jug.

• If on High speed the food is not circulating, try using the tamper. If this is also

not working, try using a slower speed. Once the food begins to circulate again,

you can switch back to a High speed.

• Due to the power of the machine, it is normal for it to be fairly loud during

operation. Through the blending cycle, the noises may change, but there is no

need to be concerned.

Ice Crushing: For optimal ice crushing, fill the jug with preferred amount of ice.

Then fill with water just above where the ice stops. Use the speed dial to blend

on High for a few seconds. Then drain out the excess water and you are left

with a jug filled with great consistent ice!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oster OPB9000 Versa in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oster OPB9000 Versa Manual

Product: