Manual Osann BeLine SP Luxe (page 16 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

492324

Zoom out

Zoom in

1/40

GB - User guide

CAUTION: a well adjusted harness plays an essential role in protecting your baby

more effectively. You should not be able to place more than the width of a ﬁnger

between the harness and the child.

Place the car seat against the back seat of your vehicle (12). Lower the head sup-

port as far as it will go. Pull the safety belt until it is completely slack. Place the

two ends of the belt through the opening in the cover and the back of the car seat

ensuring that the diagonal end goes up vertically between the back and the head

support (13).

Pull the safety belt through the opposite openings. Make sure that the safety belt

goes behind the harness of the car seat (14).

Ensure that the lap end of the belt passes under the armrest of the car seat and

that the diagonal end goes under the red guide on the back. Fasten the safety belt,

ensuring that the belt is not twisted (15). Push the car seat ﬁrmly against the back

seat of the vehicle and tighten the belt as far as possible by pulling the lap and

diagonal end up towards the inertia reel (16).

Open the buckle of the harness by pressing on the red button in the centre of the

buckle. Place your child in the car seat. Join together both ends of the shoulder

harness and fasten the harness buckle until you hear it click (17). Pull on the ad-

justment strap of the harness so that the shoulder straps are ﬁtting snugly over

your child (18).

Installation without the harness

Gr. 2-3, from 15 to 36 kg (from approximately 3 to 12 years)

Ensure that the harness of your car seat is not attached and that the adjustable

head support has been set to the size of your child before starting to install it in

your vehicle. Your car seat is group 2 and 3 approved and has a back support.

Never remove the back of your car seat. Without the back, your child will not

be protected laterally.

• Undoing the harness: repeat operations (6), (7) and (8). Release the buckle con-

nectors on each end of the harness (19) then pull the harness through the vertical

part of your car seat (20). Remove the crotch strap by twisting the metal stop then

passing it through the seat and the seat cover (21).

• Adjusting the head support: the adjustable head support is designed to be used

as your child grows up providing maximum lateral protection. The belt guides of

the head support must be placed as close to your child’s shoulders as possible

(22).

Place the car seat against the back seat of your vehicle (23). Seat your child on

the car seat. The diagonal end of the belt goes into the strap guide of the head

support and under the opposite armrest. The lap end of the safety belt goes under

the armrests (24). Fasten the safety belt. Ensure that the belt is tight enough and

not twisted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Osann BeLine SP Luxe in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Osann BeLine SP Luxe Manual

Product: