562984
4
Zoom out
Zoom in
Previous page
1/6
Next page
http://www.orion.ua4
Setting the temperature
Fabric Temperature control
NYLON/ACRYLIC/ACETATE
SILK/RAYON/POLYESTER

WOOL/COTTON

LINEN MAX
1. Stand the iron on its heel and plug the power cord into wall socket.
2. Turn the iron temperature control knob until you get the desired
fabric/temperature setting. We recommend using the above table as a guide.
3. The temperature pilot light will light, indicating that the soleplate is heating up.
4. When the pilot light goes out, the required temperature has been reached. The
temperature pilot light will go on from time to time during ironing.
Dry ironing
1. Set the steam button to position «0» or «
».
2. Turn the temperature control knob to select the desired fabric/temperature
setting. The indicator pilot light will light, put the iron on the smooth and stable
place vertically.
3. When the indicator pilot light goes out, the required temperature has been
reached.
4. You can begin to iron.
Spraying
1. Ensure there is enough water in the water tank.
2. Press the spray button to produce a fine spray of spray nozzle and continue
ironing
Note: Do not spray silk.
Steam ironing
1. As indicated on the temperature control and the table on the iron, steam-ironing
is only possible at higher ironing temperatures (between “” to “MAX”).
2. Ensure that there is enough water in the water tank.
3. Stand the iron on its end; Insert the main plug into the wall socket.
4. Set the temperature control knob at the required position within the steam area.
5. After the indicator pilot light has gone out and has come on again, you may start
ironing.
6. Turn the steam control knob to the required position.
Note:
Never direct the steam towards people and animals. Burns or serious injury may
occur.
Strong steam
This function is used to iron out deep wrinkles, to iron cuffs and coarse fabrics.
1. Ensure that there is enough water in the water tank.
2. When the temperature control knob is set to steam setting (between to
“MAX”) strong steam can be used.
3. Press the burst steam button, the soleplate will spray out strong steam.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orion ORI-025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orion ORI-025 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info